Project Title: | 01 (A title that says what your project does) |
Machine Brand: | 02 (Ultimaker, RepRap, Formlabs, etc) |
Machine Version: | 03 (Ultimaker2, Makerbot Replicator2, etc) |
Filament/Material you used: | 04 (pal, abs, wood fill, pett, etc) |
Filament Brand: | 05 (ColorFabb, Taulman, Ninja-Flex, etc) |
Filament Diameter: | 06 (1.75 or 2.85, etc) |
Layer Height: | 07 (0.25mm, 0.2mm, 0.1mm, 0.06mm, 0.02mm, etc) |
Object InFill: | 08 (20%, 45%, 100%, etc) |
Object Print Speed: | 09 (30mm/s, 50mm/s, 100mm/s, etc) |
Print Temperature: | 10 (Often between 210 C˚ and 230 C˚) |
Support Type: | 11 (Touching Buildplate, Everywhere, None) |
Platform Adhesion Type: | 12 (Raft, Brim, heated-bed, None) |
Duration of the print: | 13 ("min" for minutes, and "h" for hours) |
Length of the filament: | 14 (in centimeters, meters, etc) |
weight of the print: | 15 ("g" for grams, "kg" for kilograms, etc,) |
Cost of the print: | 16 (in euros or whatever money you use") |
Software you used to convert your .STL 3D object into a G-Code file: | 17 (Cura, MakerWare, etc) |
Software you used to draw this 3D object: | 18 (123D Design, Solidworks, Inventors, etc) |
Software you used to analyze and repair this 3D object: | 19 (NetFabb Basic) |
Files were designed by You: | 20 (yes I designed it/no I didn't design it) |
Files were downloaded from: | 21 (if relevant) |
Files were downloaded and modified by you: | 22 (yes I downloaded it/no I didn't download it) |
Your Name: | 23 (Shouldn't be complicated) |
(Maybe) Are you a member of: | 24 (A hackerspace, a fablab, a makerspace, etc) |